MTCNA Study Guide: Latest [Oct 20, 2022] Realistic Verified MTCNA Dumps
MTCNA Questions & Practice Test are Available On-Demand
NEW QUESTION 44
For user in local PPP Secrets/PPP Profiles database, it is possible to
- A. Allow/deny use of more than one login by this user
- B. Allow login by PPPoE and PPTP, but deny login by L2TP
- C. Set max values for transferred data (Rx/Tx)
- D. Deny services (like telnet) only for this user or for one group of users
- E. Allow only PPPoE login
Answer: A,C,E
NEW QUESTION 45
You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this?
- A. SMTP
- B. SNMP
- C. ARP
- D. DHCP
Answer: D
NEW QUESTION 46
To block communications between wireless clients connected to the same access point interface, you should set
- A. 'max-station-count=1'
- B. 'default-authentication=no'
- C. 'default-forwarding=no'
- D. 'default-authentication=no' and 'default-forwarding=no'
Answer: C
NEW QUESTION 47
In which situations Netinstall can not be used to install RouterOS on a RouterBOARD?
- A. The router is connected only to a secondary Ethernet port
- B. The router is connected only to a wireless network
- C. The router does not have an operating system
- D. The password of the router is not known
Answer: B
NEW QUESTION 48
Which command is used to determine if an IP access list is enabled on a particular interface?
- A. show interface access-lists
- B. show access-lists
- C. show ip interface
- D. show interface
Answer: D
NEW QUESTION 49
What command is used to create a backup configuration?
- A. copy running-config startup-config
- B. copy running backup
- C. config mem
- D. wr mem
Answer: A
NEW QUESTION 50
In RouterOS queue configurations the word "total" usually represents
- A. Download
- B. upload + download
- C. upload
- D. download - upload
Answer: B
NEW QUESTION 51
Which computers would be able to communicate directly (without any routers involved):
- A. 10.10.0.17/22 and 10.10.1.30/23
- B. 192.168.0.5/26 and 192.168.0.100
- C. 192.168.17.15/29 and 192.168.17.20/28
- D. 10.5.5.1/24 and 10.5.5.100/25
Answer: A,D
NEW QUESTION 52
What is term for the hardware coded address found on an interface?
- A. IP Address
- B. Interface Address
- C. FQDN Address
- D. MAC Address
Answer: D
NEW QUESTION 53
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.
- A. Configure '/system ntp client' and set a valid and reachable NTP server address.
- B. Configure '/system ntp server' and set a valid and reachable NTP client address.
- C. Open the router and ensure the CMOS battery is fine.
- D. Write a script in '/system script' to set the clock
Answer: A
NEW QUESTION 54
What protocol is used to find the hardware address of a local device?
- A. RARP
- B. ARP
- C. IP
- D. ICMP
Answer: B
NEW QUESTION 55
What PPP protocol provides dynamic addressing, authentication, and multilink?
- A. NCP
- B. HDLC
- C. X.25
- D. LCP
Answer: D
NEW QUESTION 56
Using wireless connect-list it's possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries.
- A. False
- B. True
Answer: A
NEW QUESTION 57
The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
- A. Application
- B. Host-to-Host
- C. Internet
- D. Network Access
Answer: C
NEW QUESTION 58
Which wireless mode allows you to connect to any standard AP (not only MikroTik) and to be able to bridge this wireless interface to an Ethernet?
- A. bridge
- B. station-pseudobridge
- C. station-wds
- D. station
Answer: D
NEW QUESTION 59
What is necessary for PPPoE client configuration?
- A. ip firewall nat masquerade rule
- B. Static IP address on PPPoE client interface
- C. Interface (on which PPPoE client is going to work)
Answer: C
NEW QUESTION 60
What can be used as 'target-address' in the simple queue?
- A. client's address
- B. server's address
- C. client's MAC address
- D. address list name
Answer: A
NEW QUESTION 61
Which of the following commands will allow you to set your Telnet password on a Cisco router?
- A. line telnet 0 4
- B. line con 0
- C. line aux 0 4
- D. line vty 0 4
Answer: D
NEW QUESTION 62
One host on an internal network is accessing an external web page through a MikroTik router that is doing source NAT. Select correct statement about the packets that flow from that web page to the host ?
- A. Packets go through the input chain
- B. Packets go through the output chain
- C. Packets go through the input chain before the routing decision and after that through output chain
- D. Packets go through the forward chain
Answer: D
NEW QUESTION 63
How many different priorities can be selected for queues in MikroTik RouterOS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 64
You have a router with configuration
- Public IP :202.168.125.45/24
- Default gateway:202.168.125.1
- DNS server: 248.115.148.136, 248.115.148.137
- Local IP: 192.168.2.1/24
Mark the correct configuration on client PC to access to the Internet
- A. IP:192.168.0.1/24 gateway:192.168.2.1
- B. IP:192.168.2.253/24 gateway:202.168.0.1
- C. IP:192.168.1.223/24 gateway:248.115.148.136
- D. IP:192.168.2.115/24 gateway: 192.168.2.1
- E. IP:192.168.2.2/24 gateway:202.168.125.45
Answer: D
NEW QUESTION 65
......
Valid MTCNA Exam Dumps Ensure you a HIGH SCORE: https://topexamcollection.pdfvce.com/MikroTik/MTCNA-exam-pdf-dumps.html