[Oct-2022 Newly Released] NSE5_FMG-6.4 Exam Questions For You To Pass
Fortinet NSE5_FMG-6.4 Exam: Basic Questions With Answers
What are the Prerequisites to take the Fortinet NSE5_FMG-6.4 Certification Exam?
As described in the NSE5_FMG-6.4 Dumps, the candidates who want to take the Fortinet NSE5_FMG-6.4 Certification Exam must have working experience and a good understanding of the concepts of networking and network security. The updates on the latest trends in network security are a must.
Here is the info about the topics of the Fortinet NSE5_FMG-6.4 Certification Exam:
According to the NSE5_FMG-6.4 Dumps, there are the following topics of the Fortinet NSE5_FMG-6.4 Certification Exam:
- Policy and objects
- Advanced and additional configuration
- Diagnostics and troubleshooting
- Administration
- Device Manager
NEW QUESTION 20
Refer to the exhibit.
Which two statements about the output are true? (Choose two.)
- A. Configuration changes directly made on the FortiGate have been automatically updated to device-level
- B. The latest history for the managed FortiGate does not match with the device-level database
- C. Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed
- D. The latest revision history for the managed FortiGate does match with the FortiGate running configuration
Answer: B,D
Explanation:
database
Explanation:
STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up - dev-db: modified - This is the device setting status which indicates that configuration changes were made on FortiManager. - conf: in sync - This is the sync status which shows that the latest revision history is in sync with Fortigate's configuration. - cond: pending - This is the configuration status which says that configuration changes need to be installed.
Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn't installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn't match device DB.
Conclusion: - Revision DB does match FortiGate. - No changes were installed to FortiGate yet. - Device DB doesn't match Revision DB. - No changes were done on FortiGate (auto-update) but configuration was retrieved instead After an Auto-Update or Retrieve: device database = latest revision = FGT Then after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).
After reverting to a previous revision in revision history: device database = reverted revision != FGT
NEW QUESTION 21
An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)
- A. Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces
- B. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings
- C. Enable SD-WAN central management in the Training ADOM
- D. Specify a gateway address when you create a default SD-WAN static route
Answer: A,C
NEW QUESTION 22
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?
- A. auto-discovery
- B. virtual-wan-link
- C. port1
- D. port2
Answer: B
NEW QUESTION 23
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?
- A. By a dollar symbol ($) at the end of the device name
- B. By an Asterisk (*) at the end of the device name
- C. By a
- D. By an at symbol (@) at the end of the device name
Answer: B
NEW QUESTION 24
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?
- A. Set to normal and use the policy locking feature
- B. Set to workflow and use the ADOM locking feature
- C. Set to read/write and use the policy locking feature
- D. Set to disable and use the policy locking feature
Answer: B
NEW QUESTION 25
What will happen if FortiAnalyzer features are enabled on FortiManager?
- A. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices
- B. FortiManager can be used only as a logging device.
- C. FortiManager will reboot
- D. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager
Answer: C
NEW QUESTION 26
View the following exhibit.
Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?
- A. Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
- B. Policy seq#3 will be installed on the Trainer[NAT] VDOM only
- C. The Install On column value represents successful installation on the managed devices
- D. Policy seq#3 will be not installed on any managed device
Answer: A
NEW QUESTION 27
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- B. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
- C. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- D. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
Answer: D
NEW QUESTION 28
Refer to the exhibit.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. It disables concurrent read-write access to an ADOM.
- B. It allows the same administrator to lock more than one ADOM at the same time.
- C. It is used to validate administrator login attempts through external servers.
- D. It allows two or more administrators to make configuration changes at the same time, in the same ADOM.
Answer: A,B
NEW QUESTION 29
Refer to the exhibits.
Exhibit one.
Exhibit two.
An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?
- A. The DNS addresses in the default system settings are the same as the Training system template
- B. The Training system template does not have assigned devices
- C. The Training system template has other default settings
- D. The ADOM is locked by another administrator
Answer: C
NEW QUESTION 30
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)
- A. You must install these changes using the Install Wizard to a managed device
- B. The successful execution of a script on the Device Database will create a new revision history
- C. The script history will show successful installation of the script on the remote FortiGate
- D. The Device Settings Status will be tagged as Modified
Answer: A,D
NEW QUESTION 31
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
- A. Trainer must close Student's workflow session before approving the request
- B. Student, who submitted the workflow session, must first self-approve the request
- C. Trainer is not a part of workflow approval group
- D. Trainer does not have full rights over this ADOM
Answer: C
NEW QUESTION 32
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?
- A. When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.
- B. When a new policy package is created, the administrator must assign the global policy package from the global ADOM.
- C. When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package
- D. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.
Answer: D
NEW QUESTION 33
Which two items does an FGFM keepalive message include? (Choose two.)
- A. FortiGate configuration checksum
- B. FortiGate uptime
- C. FortiGate IPS version
- D. FortiGate license information
Answer: A,C
NEW QUESTION 34
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?
- A. The FortiManager administrator must add the unregistered device manually to the unregistered device
- B. The FortiGate will be automatically added to the Training ADOM.
- C. The FortiGate will be added automatically to the default ADOM named FortiGate.
- D. By default, the unregistered FortiGate will appear in the root ADOM.
Answer: D
Explanation:
manually to the Training ADOM using the Add Device wizard
NEW QUESTION 35
......
For the registration of the Fortinet NSE5_FMG-6.4 Certification Exam, you have to follow the following procedure
The registration process of the NSE5_FMG-6.4 Exam is very simple and straightforward. As discussed in the NSE5_FMG-6.4 Dumps, you can register yourself for the NSE5_FMG-6.4 Certification Exam through Pearson Vue. Steps to get registered for the Fortinet NSE5_FMG-6.4 Certification Exam are as follows:
- Then, go to the Exam page and select the desired exam from the list of exams.
- After paying the fee, you will get a confirmation mail that contains a link to your exam.
- Go to the Pearson Vue official website.
New 2022 Realistic Free Fortinet NSE5_FMG-6.4 Exam Dump Questions and Answer: https://topexamcollection.pdfvce.com/Fortinet/NSE5_FMG-6.4-exam-pdf-dumps.html