Prepare For Realistic PEGAPCBA86V1 Dumps PDF - 100% Passing Guarantee
Check the Available PEGAPCBA86V1 Exam Dumps with 160 Q's
NEW QUESTION 50
Which two dependencies do you enforce with a Wait step?
(Choose Two)
Response:
- A. Pausing a case until another case (or all cases) reach a specified status
- B. Preventing a case from resuming until an automated decision executes
- C. Preventing a case from entering a stage until a condition is met
- D. Pausing a case until a predetermined time expires
Answer: A,D
NEW QUESTION 51
You have created a new report that contains a list of resolved expense reports by approver. Columns include Expense #, Expense Amount, Approved (Y/N), Resolution Date, Comments, and Approver ID. The finance manager wants you to display each Approver ID in a row, Beneath each approver, you must list the expenses Expense Amount, Resolution Date, Approver ID, and Comments.How do you configure the report? (Choose One)
- A. Filter by the Approver ID column.
- B. Group by the Approver ID column.
- C. Summarize the Approver ID column.
- D. Sort the Approver ID column.
Answer: B
NEW QUESTION 52
Consider the following user story: As a customer, I want to the able to cancel an open service request at any time. Select the configuration option that satisfies the user story.
Response:
- A. Add a stage-only action to each stage in the case life cycle
- B. Configure the Cancel button on the user views to resolve the case.
- C. Add a case wide action to the case life cycle.
- D. Add an alternate stage to the case life cycle.
Answer: C
NEW QUESTION 53
Which statement best represents the relationships between controls, formats, and mixins? (Choose One)
- A. A mixin specifies a control which defines a format
- B. A format uses a mixin that defines a control
- C. A control specifies a format which uses a mixin
- D. A control specifies a mixin which defines a format
Answer: C
NEW QUESTION 54
An application includes the property .Employee.Dependent(2).DateOfBirth. The property mode of
.Dependent(2) is a___________________. (Choose One)
- A. PageGroup
- B. ValueList
- C. PageList (Field Group List)
- D. ValueGroup
Answer: C
NEW QUESTION 55
A list report includes columns for purchase requests and regional cost centers. A manager wants the report to show the total number of purchase requests for each of the regional cost centers. How do you configure the report definition?
Response:
- A. Summarize the purchase requests column by count.
- B. Summarize the regional cost centers by count.
- C. Filter the results so that only cost center and purchase requests are included in the report.
- D. Use the purchase requests column to group the cost centers.
Answer: A
NEW QUESTION 56
Consider this requirement for a business transaction: An employee submits a request to purchase equipment. The request is sent to the manager for review and approval.
- If approved, the request is forwarded to the Fulfillment department.
- If the manager rejects the request, it is sent back to the employee for reconciliation or cancellation.
- The Fulfillment department will process the request if the requested items are in stock.
Select the case life cycle design that most closely follows the guidelines for identifying and naming stages.
Response:
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: C
NEW QUESTION 57
An application references the property .Customer.Address(Billing).State. What is the property mode for.Address(Billing)?
Response:
- A. Page List
- B. Page Group
- C. Single Value
- D. Page
Answer: A
NEW QUESTION 58
You are configuring a declarative network that contains eleven declare expressions to calculate the interest rate for a home mortgage. For example, the target value Property Tax Assessment is used as a source value when calculating the Assessed Property Value. The declare expressions use target values from other expressions to calculate their target values. The field that displays the interest rate appears on the approval form. To improve performance, how can you reduce the number of calculations ?
- A. Specify whenever used in the total interest rate declare expression
- B. Apply the declare expression in the approval flow action
- C. Specify Property Tax Assessment as trigger event in the declare expression that calculates the total interest rate value
- D. Calculate the total interest rate value by adding all the declare expression target property values
Answer: A
NEW QUESTION 59
In an insurance claim application, you have the following requirement: All claims must be processed within 1 week. To meet this requirement you configure a service level. Where should the service level be configured?
- A. The case type
- B. The stage
- C. The step
- D. The process
Answer: D
NEW QUESTION 60
You have a data page with customer dat
a. The data page is configured to reload if it is older than one hour. Which of the following best describes when the data page will reload?
Response:
- A. The data page reloads on the next access one hour after it was last accessed.
- B. The data page reloads automatically one hour after it was created.
- C. The data page reloads on the next access one hour after it was created.
- D. The data page reloads automatically one hour after it was last accessed.
Answer: C
NEW QUESTION 61
What three questions should you answer to create effective correspondence ? (Choose Three) Who is the user that receives the correspondance ?
- A. When does the correspondance need to be sent
- B. Which email server should the correspondance use ?
- C. How often should you send correspondance ?
- D. How will the correspondance be sent ?
Answer: B,C,D
NEW QUESTION 62
You are defining a view for a loan application. If the loanapplicant indicates that there is an existing open account, the Date account opened must be before the current date.
How do you configure the case type to verify that the value of Date account opened is in the past?
- A. Use a when condition.
- B. Use a pick list control.
- C. Use a validation condition.
- D. Use a calendar control.
Answer: C
NEW QUESTION 63
A manager requests a report that contains the following columns: Create Date, Case ID, Create Operator, and Work Status. You must sort the Case ID values so the case with the highest ID value appears at the top of the list and descends in order.
How would you design the report definition to support this requirement?
Response:
- A. Add a filter condition where Case ID is greater than one.
- B. For the Case ID property. select Highest to Lowest sort type.
- C. Make sure that the Case ID is the first column in the report.
- D. For the Case ID property. select Count in the Summarize column.
Answer: B
NEW QUESTION 64
In a job application case for a call center position, all customer service agents must speak English, but positions for Spanish, French, and German speakers are also available.
During the interview process illustrated below, the Conduct Interview assignment task must be routed to an interviewer who speaks the same language as the applicant.
What is the best way to design routing so the correct interviewer is assigned the task?
Response:
- A. Route the job application to an operator within a skilled group using the Specific user option.
- B. Route the job application to a specific queue using the Use business logic option.
- C. Route the job application to a specific user using the Use business logic option.
- D. Route the job application to an appropriately skilled operator using the Specific user option.
Answer: B
NEW QUESTION 65
A __________ displays the overall form for viewing a work item.
Response:
- A. Section
- B. Harness
- C. Flow Action
- D. Layout
Answer: D
NEW QUESTION 66
A requirement for a hotel reservation case type states that as customers change their room selection, the total cost of thereservation updates accordingly.
How do you satisfy this requirement?
- A. Configure a calculation for the total cost held.
- B. Configure a field group list for all the room types.
- C. Configure awhen condition for the total cost field.
- D. Configure a validate condition for the total cost field.
Answer: B
Explanation:
Explanation
https://collaborate.pega.com/question/test-process-flow
NEW QUESTION 67
Which two situations require adata type? (Choose Two)
- A. Patient medical history is accessed from and written to an external system of record.
- B. A Date of account creation field is set to a default value of the current date.
- C. A Work preference picklist is populated with two values: Full time and Part time.
- D. A Currency drop-down is populated with values from an external system of record.
Answer: C,D
NEW QUESTION 68
You have been asked to create a pie chart that shows the number of cases each manager has created. A list report contains columns for manager name, case ID, and office. How do you configure the list report in order to create the pie chart?
Response:
- A. Group the manager name column.
- B. Summarize the case ID column.
- C. Group the case ID column.
- D. Summarize the manager name column.
Answer: B
NEW QUESTION 69
In a purchase request case type, you have the following requirement: Purchase requests should automatically go to a manager of an employee. To meet this requirement, you design a case with a
__________.
Response:
- A. process that routes to the manager
- B. change stage step to allow the employee to route to the manager
- C. step that routes to the manager
- D. stage to route requests to the manager
Answer: C
NEW QUESTION 70
An application allows employees to submit expense reports on a weekly basis. Expense reports must be approved by both employee's manager and audited by finance. The tasks may be completed in any order, but both must be approved for payment to be made. How do you configure the approvals in the application (Choose One)
- A. Configure cascading approval process based on user reporting structure
- B. Configure parallel processes for each set of required steps
- C. Configure a case-wide optional process for each approval process
- D. Configure cascading approval process based on an authority matrix
Answer: B
NEW QUESTION 71
Consider the following user story: As an account owner, I want to be able to add a member to my account so I can give the member temporary access.
Which two questions help you define the fields for the user view?
(Choose Two)
Response:
- A. Do the fields about the temporary member need to be displayed in multiple languages?
- B. How do the fields for the temporary member need to be displayed?
- C. Will field information about the temporary member be stored in an external database?
- D. What fields does the account owner need to see to be able to add a temporary member?
Answer: B,D
NEW QUESTION 72
pyWorkPage stores which type of information?
Response:
- A. Information about the current operator.
- B. Information about a case.
- C. Information about the Pega server.
- D. Data cached from an outside system.
Answer: B
NEW QUESTION 73
You are designing a travel plan application. A hotel booking step displays a form in which users select a hotel and enter their check-in and check-out dates. The application calculates and then displays the cost for the hotel room.
The form also includes fields to select options, such as valet parking. at an extra cost. The application totals the cost for any selected options and adds that amount to the total room cost to equal the grand total. which is displayed in a field.
Which two of the following properties would you use as the target properties?
(Choose Two)
Response:
- A. Price of each option
- B. Total cost of option
- C. Total cost for the hotel room
- D. Number of days at the hotel
Answer: B,C
NEW QUESTION 74
An application includes the property .Employee.Dependent(2).DateOfBirth. The property mode of
.Dependent(2) is a___________________.
(Choose One)
Response:
- A. PageGroup
- B. ValueList
- C. PageList (Field Group List)
- D. ValueGroup
Answer: C
NEW QUESTION 75
......
Download PEGAPCBA86V1 Exam Dumps Questions to get 100% Success: https://topexamcollection.pdfvce.com/Pegasystems/PEGAPCBA86V1-exam-pdf-dumps.html